HPE 1.92TB SATA 6G RI LFF SCC 3.5″ SSD P09693-B21 P09848-001

The paragraph introduces the HPE 1.92TB SATA P09693-B21 P02760-004. We designate the first number as the part number used by Hewlett Packard Enterprise (HPE) for this product. Also, HPE utilizes the second number for this Solid State Drive (SSD), assigning both a part number and an SSD for each hard drive (HDD) or SSD model launched with any tray. Basically, for each new HDD or SSD, HPE employs a part number and a model number. Equally, the drive is compatible with different types of trays for each type of ProLiant Server manufactured, including Small Form Factor (SFF) or Large Form Factor (LFF), each with its part number.

Each drive also possesses a manufacturer part number and model number, resulting in a total of six numbers for identification. Through newsletters of each manufacturer or directly at the HPE Part Surfer website you could verify all part numbers when HPE launches new part numbers with these partners and uses newer or older drives. Among the manufacturers of SSDs or HDDs partnered with HPE, enterprises like Intel, Samsung, Micron, SK Hynix, Toshiba, Kioxia, and others are noted.? We have reorganized each part number and spare part on our website for your convenience, presenting detailed information about each manufacturer. Additionally, we offer functional equivalents or exact part purchases for your equipment. You can purchase each drive directly on Amazon for your safety.

The spare number for this drive, P09848-001, is always found on the front of your original drive using a tray. However, other drives may have the numbers engraved on the original HPE labels or holograms. Drives are available in different formats, including Small Form Factor (SFF), Large Form Factor (LFF), Enterprise and data center standard Form Factor: (EDSFF) E3.S, M.2, and PCIe/NVME Add-In-Cards (AIC). Finally, based on industry-leading NAND Flash technology, these drives surpass traditional rotating HDDs in latency and energy efficiency, offering better endurance and performance while seamlessly integrating into existing HPE servers and storage infrastructures.

Description:

HPE 1.92TB SATA 6G RI LFF SCC 2.5″ SSD P09693-B21 P09848-001 P02760-004 VK001920GWSRU

SPECIFICATION HPE 1.92TB SSD:

• SSD CAPACITY: 1.92TB
• INTERFACE TYPE: Serial ATA (SATA)
• INTERFACE SPEED: 6G
• ENDURANCE: (RI)
• FORM FACTOR TYPE: Large Form Factor (LFF)
• SSD PART NUMBER: P02760-004 VK001920GWSRU
• GPN#: P04573-006 P09699-005
• OTHER #:
• TRAY: SmartCarrier Converter (SCC)
• LFF SCC TRAY #: 651314-001 ,TRAY CADDY ADAPTER #: 661914-001

HPE 1.92TB SSD Manufacturer Info:

• SAMSUNG PM883
• Part #: MZ7LH1T9HMLT-00AH3
• Model: MZ-7LH1T90

Sequential Read / Write Performance:

• Sequential Read (128 KB): 550 MB/s

• Sequential Write (128 KB): 520 MB/s

 

Sustained Random Read / Write Performance:

• Random Read IOPS (4 KB): 98K IOPS
• Random WRITE IOPS (4 KB): 24K IOPS

IOPS Consistency:

• Random Read (4 KB): 99%
• Random Write (4 KB): 90%

Latency:

• Read (4 KB): 120
• Write (4 KB): 40

Quality of Service (QoS)  (99%):

• Read (4 KB, QD=1): 0.25ms
• Read (4 KB, QD=1): 0.15ms
• Read (4 KB, QD=32): 0.5ms
• Write (4 KB, QD=32): 2.7ms

Operating Voltage:

• Allowable voltage: 5.0 V + 5%
• Allowable noise/ripple: 100 mV p-p or less

Power Consumption:

• Active Write>1 (Typ.): 2.9W
• Active Read>2 (Typ.): 2.3W
• Idle>3: 1.3W

Inrush Current:

• 1.2A, <1sec

Environmental Specifications:

Features Operating:

• Temperature>1: 0 °C to 70 °C
• Temperature Gradient: 30 °C /Hr

Features Non-Operating:

• Temperature1: -40 °C to 85 °C
• Temperature Gradient: 30 °C /Hr

Operating / Non-Operating

• Humidity: 5 % to 95 %, non-condensing

MTBF Specifications:

• 2,000,000 Hours
   

UBER Specifications:

• 1 sector per 10>17bits read

TBW (TeraBytes Written) Specifications:

• 683TB

Check on eBay HPE Products with Our partner: The Data Center Express

Check on Amazon Partner Store: The Data Center Express

HPE 1.92TB SSD