HPE 480GB SATA 6G VE SFF NHP 2.5″ SSD 728214-B21 728310-001
The paragraph introduces the HPE 480GB SATA 728214-B21 717968-002. Hewlett Packard Enterprise (HPE) designates the first number as the part number used. Additionally, HPE assigns the second number to this Solid State Drive (SSD). Essentially, for each new SSD, HPE employs a unique part number and model. Furthermore, every type of ProLiant Server manufactured has different types of trays, such as the Small Form Factor (SFF) or Large Form Factor (LFF), each associated with an independent part number.
Each drive possesses a manufacturer part number and model number, resulting in a total of six identification digits. You can verify all part numbers through newsletters from each manufacturer or directly on the HPE PartSurfer website. When HPE introduces new part numbers in collaboration with these partners or utilizes older or newer drives, you?ll find the relevant information. Notably, HPE partners with SSD and HDD manufacturers such as Intel, Samsung, Micron, SK Hynix, Toshiba, Kioxia, and others. On our website, we?ve reorganized each part number and spare part, providing detailed information about each manufacturer. Additionally, we offer functional equivalents and exact part purchases for your equipment. For added convenience, you can directly purchase each drive on Amazon while ensuring safety.
The spare number for this drive, 728310-001, is consistently located on the front of your original drive using a tray. However, other drives may have the numbers engraved on the original HPE labels or holograms. Drives come in various formats, including Small Form Factor (SFF), Large Form Factor (LFF), and the enterprise and data center standard form factor known as E3.S. Additionally, you?ll find drives in M.2 and PCIe/NVME Add-In-Cards (AIC) formats. Leveraging industry-leading NAND Flash technology, these drives outperform traditional rotating HDDs in terms of latency and energy efficiency. They offer superior endurance and performance while seamlessly integrating into existing HPE servers and storage infrastructures.
Description:
HPE 480GB SATA 6G VE SFF NHP 2.5″ SSD 728214-B21 728310-001 717968-002 VK0480GDJXV
SPECIFICATION HPE 480GB SSD:
| SSD CAPACITY: | 480GB |
| INTERFACE TYPE: | Serial ATA (SATA) |
| INTERFACE SPEED: | 6G |
| ENDURANCE: | Value Endurance (VE) |
| FORM FACTOR TYPE: | Small Form Factor (SFF) |
| SSD PART AND MODEL NUMBER: | 717968-002 VK0480GDJXV |
| GENERAL PART NUMBER (GPN #): | 727823-001 728215-001 |
| OTHER PART NUMBERS: | 728426-001 |
| SSD TRAY TYPE: | Non-Hot-Plug (NHP) |
| SFF NHP TRAY PART NUMBER: | DOES NOT USE ANY TRAY |
HPE 480GB SSD Manufacturer Info:
| MANUFACTURER MODEL: | INTEL S3500 |
| PART NUMBER: | G91776-203 |
| MODEL NUMBER: | SSDSC2BB480G4P |
Performance:
- Random Read/Write Input/Output Operations Per Second (IOPS)
- Random 4KB Read (up to)>2: 75,000 IOPS
- Random 4KB Write (up to): 11,000 IOPS
- Random 8KB Read (up to)>3: 47,500 IOPS
- Random 8KB Write (up to): 5,500 IOPS
Random Read/Write IOPS Consistency
- Random 4 KB Read (up to)>2: 90%
- Random 4 KB Write (up to): 80%
- Random 8 KB Read (up to)>3: 90%
- Random 8 KB Write (up to): 80%
Sequential Read and Write Bandwidth
- Sequential Read (SATA 6Gb/s)>1: 500 MB/s
- Sequential Write (SATA 6Gb/s)>1: 410 MB/s
Latency:
Latency>1 (TYP)
- Read: 50µs
- Write: 65µs
- Power On to Ready>2: 2.0s
QoS:
Quality of Service>1, 2 – (99.9%)
- Reads: 0.5ms
- Writes: 5ms
Quality of Service>1,2 – (99.9999%)
- Reads: 5ms
- Writes: 10ms
Operating Voltage for 2.5-inch Form Factor
5 V Operating Characteristics:
| Operating Voltage Range | 5 V (±5%) |
| Rise time (Max/Min) | 1 s / 1 ms |
| Fall time (Min)>2 | 1 ms |
| Noise level | 500 mV pp 10 Hz – 100 KHz |
| 50 mV pp 100 KHz – 20 MHz | |
| Min Off time>3 | 500 ms |
| Inrush Current (Typical Peak)>1 | 1.0 A, < 1 s |
12 V Operating Characteristics:
| Operating Voltage Range | 12 V (±10%) |
| Rise time (Max/Min) | 1 s / 1 ms |
| Fall time (Min)>2 | 1 ms |
| Noise level | 1000 mV pp 10 Hz – 100 KHz |
| 100 mV pp 100 KHz – 20 MHz | |
| Min Off time>3 | 500 ms |
| Inrush Current (Typical Peak)>1 | 1.0 A, < 1 s |
Power Consumption for 2.5-inch Form Factor (5V Supply):
- Active Write – RMS Average >1: 4.3W
- Active Write –RMS Burst >2: 5.2W
- Active Read – RMS Average >3: 1.3W
- Active Read – RMS Burst >4: 3.3W
- Idle: 0.6W
Power Consumption for 2.5-inch Form Factor (12V Supply):
- Active Write – RMS Average >1: 4.3W
- Active Write – Burst >2: 5.5W
- Active Read – RMS Average >3: 1.7W
- Active Read – RMS Burst >4: 3.6W
- Idle: 0.9W
Temperature:
Case Temperature
- Operating: 0 – 70 oC
- Non-operating>1: -55 – 95 Oc
Temperature Gradient>2
- Operating: 30 oC/hr (Typical)
- Non-operating: 30 oC/hr (Typical)
Humidity
- Operating: 5 – 95 %
- Non-operating: 5 – 95 %
Shock and Vibration:
Shock>3
- Operating: 1,000 G (Max) at 0.5 msec
- Non-operating: 1,000 G (Max) at 0.5 msec
Vibration>4
- Operating: 2.17 GRMS (5-700 Hz) Max
- Non-operating: 3.13 GRMS (5-800 Hz) Max
Reliability Specifications:
- Uncorrectable Bit Error Rate (UBER): < 1 sector per 1017 bits read
The uncorrectable bit error rate will not exceed one sector in the specified number of bits read. In the unlikely event of a non-recoverable read error, the SSD will report it as a read failure to the host; the sector in error is considered corrupt and is not returned to the host.
Mean Time Between Failures (MTBF):
- 2 million hours
Mean Time Between Failures is estimated based on Telcordia* methodology and demonstrated through the Reliability Demonstration Test (RDT).
INTEL – DC S3500 SSD SPECS pdf File Support
Check on eBay HPE Products with Our partner: The Data Center Express
Reviews
There are no reviews yet.